Two-Component Fast Adhesive · Construction Chemicals
MDF Kit Activator
High-adhesion activator kit for fast curing on wood, MDF, rubber, leather and plastic surfaces.
Product features
- Fast curingSuitable where fast curing is required.
- High viscositySupports bonding on porous surfaces.
- Suitable for indoor & outdoorCan be used indoors and outdoors.
- Enhances adhesionIncreases adhesion strength.
- Suitable for vertical applyDoes not run on vertical surfaces.
Technical specifications
| Color | Transparent |
|---|---|
| Odor | Characteristic |
| Density | 1.3 g/cm³ |
| Viscosity | 1500-5000 cP (25 °C) |
| pH value | 8 |
| Drying time | Typically between 30 minutes and 1 hour |
| Flash point | 60 °C |
| Freezing point | Between -5°C and -15°C |
| Net content | 400g+80g / 200g+40g |
| Case pack | 25 pcs |
| Pallet | 70 cases / 96 cases |
Packaging options
- Large set (400g + 80g)
- Small set (200g + 40g)
Industries
Usage areas
MDF Kit Activator is intended for the following assembly, repair and fast-bonding applications:
- Assembly and repair of wooden parts
- Bonding MDF and furniture components
- Joining rubber, leather and plastic surfaces
- Porous and difficult-to-bond surfaces
- Vertical surfaces and applications requiring fast curing
Application instructions
- Ensure that the surfaces are dry, clean and free of dust and grease.
- Use the adhesive and activator together according to the product label. Application amount and waiting time may vary with the surface and ambient conditions.
- Align and join the parts, then hold them in position until the bond forms.
- Pre-test on a small area before use on sensitive or visible surfaces.
Warnings
- Read the product label and safety data sheet before use.
- Use in a well-ventilated area and avoid contact with eyes and skin.
- Use and store away from heat, sparks, open flames and direct sunlight.
- Keep out of reach of children.